FERTAN FERPOX 1K Epoxy Primer – Primer & Rust Protection (Black)

High-strength 1-component epoxy primer in black. Lead and chromate-free, temperature resistant up to 250°C and extremely adhesive.

• 1-K Epoxy Primer (no hardener needed)
• Extremely high adhesion & abrasion resistance
• Temperature resistant (-40°C to +250°C)
• Can be overcoated with 1-K and 2-K paints
• For iron, steel, aluminum & zinc
• Application: Brush, roller or spray gun (liquid product)
• Color: Black (satin finish)
• Available in 3 sizes: 400ml Spray

FERPOX is an easy-to-apply 1-component epoxy primer that nevertheless offers the resistance of a 2-component primer. It is lead and chromate-free and is characterized by particularly good adhesion to iron, steel, pre-treated aluminum or hot-dip galvanized metal. Due to its high mechanical strength, it is the ideal primer for all areas exposed to stone chips or corrosion.

In the automotive sector, FERPOX is the first choice for underbodies, wheel arches, bulkheads, frames and battery holders. The material remains permanently temperature resistant from -40°C to +250°C (color change possible) and forms the perfect base for further paint application.

Application areas

• Vehicle frames and chassis (ideal for a black finish)
• Underbodies and wheel arches
• Engine compartments and battery holders
• Restoration of classic cars

Scope of delivery

• 1 × FERTAN FERPOX 1-K Epoxy Primer Black (quantity and container type depending on selection)

Processing instructions

The substrate must be dry, free of grease, oil and silicone. Treat rust beforehand with FERTAN rust converter. Ideal processing at approx. 20°C (min. 10°C).

Please note your selection:
• 400ml Spray: Ready to use. Shake well before use. Apply thinly.
• 800ml / 2 liters (liquid): Apply with brush, roller or air gun. Apply only thin coats!
Data for spray gun: Nozzle 1.5mm | Pressure 2–4 bar | max. 10% nitro thinner.

Drying (20°C): Dust dry approx. 30 min | Touch dry approx. 60 min | Can be overcoated approx. 6 hrs.