FERTAN MM 30 Multi Metal Coating | Aluminium-Titanium-Zinc Spray 400 ml

Cathodic long-term corrosion protection based on aluminium-titanium-zinc. Extremely resistant, spot-weldable and overpaintable. Ideal as a weld primer.

• Aluminium-titanium-zinc formula
• Cathodic long-term protection
• Spot-weldable (ideal for bodywork)
• Overpaintable (adhesion promoter for 1K & 2K)
• Adheres to steel, stainless steel, aluminium, brass & copper
• Over 500 h salt spray test resistance (at 15 µm)
• Heat-resistant up to 120 °C
• Content: 400 ml spray can

The FERTAN MM 30 multi-metal coating offers high-quality, cathodic long-term corrosion protection for metallic surfaces. The special combination of aluminium, titanium and zinc produces an extremely resistant, silver-grey surface after curing.

The spray is excellent as an adhesion promoter and can be overpainted with commercially available 1K and 2K paints. A special feature is its spot-weldability, which makes it ideal for bodywork and restoration. Even at a thin film thickness of only 15 µm, the coating withstands more than 500 hours in the salt spray test.

Areas of application

• Vehicle bodies (as weld primer)
• Steel frames and steel construction
• Heating and ventilation engineering
• Industrial applications

Scope of delivery

• 1 × FERTAN MM 30 multi-metal coating, 400 ml spray can

Application note

Shake the can vigorously for at least 3 minutes before use. The substrate must be clean, dry and free of grease and silicone; remove rust beforehand with FERTAN. Apply in 1–2 thin coats from a distance of 15–25 cm.

Drying (at 20 °C):
• Dust-dry: 5–10 min.
• Touch-dry: approx. 1 h.
• Full curing: 2–3 days.
After use, turn the can upside down and spray until the valve is clear.