LIQUI MOLY Air Conditioning System Cleaner (Spray)

LIQUI MOLY Air Conditioning Cleaner (Spray)

One can is sufficient for one vehicle or air conditioning system. If the manufacturer has a service recommendation for cleaning the air conditioning system, follow it. If there are no specific car manufacturer's instructions, follow the LIQUI MOLY application recommendations. For commercial vehicle, bus, and home air conditioning systems, spray the cleaning fluid directly onto the evaporator surface if possible.

LIQUI MOLY application recommendation:

1. Open windows during the cleaning process. Avoid inhaling fumes during cleaning.
2. Check that the condensate drain holes are clear.
3. Dry the evaporator surface for 10 minutes with the engine running using the following heating and ventilation settings: Turn off the air conditioning and set it to recirculation mode. Set the air distribution switch to the footwell. Turn the temperature control and fan selector switch to max.

Cleaning the air conditioning:

1. Insert the cleaner's probe towards the evaporator (center of the vehicle) (see vehicle-specific instructions on air conditioning information: LIQUI MOLY).
2. By activating the cleaner and carefully moving the spray probe back and forth, the evaporator is thoroughly rinsed and cleaned.
3. Allow the cleaning fluid to work for 15 to 20 minutes.
4. Dry the evaporator surface for 10 minutes with the heating and ventilation system set to the same settings as before cleaning.
5. Replace dust and pollen filters.

Note: Wipe up any spilled cleaner with a damp cloth and water.