Koch Chemie One Cut & Finish P6.02

The One Cut & Finish P6.02 is a machine polish for the permanent removal of polishing haze, holograms and scratches as well as sanding marks from grit P 2000 upwards, with a simultaneous sealing effect. By using homogeneous abrasive grains, a brilliant and lasting high-gloss finish is produced. The innovative One Cut & Finish P6.02 combines an optimal ratio of abrasiveness and gloss for economical and effective work in vehicle detailing. The One Cut & Finish P6.02 is economical, polishes well and wipes off easily. Contains carnauba wax and non-volatile silicones.

Areas of application

Paintwork on cars, commercial vehicles, motorcycles etc.

Application

• For optimum results, Koch Chemie recommends working with the One Cut Pad and a high-performance dual-action polisher (min. 15 mm stroke) or a forced-rotation dual-action polisher.
• For optimum dosing, spread five pea-sized drops evenly over the pad.
• Spread the polish evenly over the surface with the machine at the lowest speed, then polish cross-wise with medium pressure.
• Do not use the sponges used for this product alternately for other products.
• For scratch-free removal of polish residues, Koch Chemie recommends the ultrasonically cut Polish & Sealing Towel.

Notes

• Shake before use.
• Test for suitability and compatibility before use.
• Do not use on hot surfaces.
• Protect from frost and excessive heat.
• Do not use on unpainted plastics & rubber.

Technical data

• Pack size: 250 ml, 1 l
• Manufacturer designation: One Cut & Finish P6.02
• Manufacturer part number: 469250 (250 ml), 469001 (1 l)
• Abrasiveness: 6.0
• Gloss level: 8.0

Manufacturer

Koch-Chemie GmbH, Einsteinstraße 42, 59423 Unna, Germany · info@koch-chemie.com

Safety data sheet (PDF)

If you have any questions, we are happy to help.